"Class S" autoclave with pre-vacuum and vacuum drying
MELAG offers practices an economically alternative to the Vacuklav-series with its Euroklav 23 VS+, which, by reason of the instruments and the type of wrapping used there, require no "Class B" steam sterilizers. The Euroklav 23 VS+, being larger than the Euroklav 29 VS+, is especially suitable for practices that want to sterilize longer instruments because it has a chamber volume of 22 litres (depth of chamber is 45 cm).
The Euroklav 23 VS+ features four "Class S" programs for sterilization of unwrapped or wrapped instruments and textiles. The powerful and efficient vacuum pump creates a simple pre-vacuum for safe removal of air before sterilization and for optimal post-drying of the instruments after sterilization. The modern electronic design permits versatility in batch documentation, by integrating with the network and MELAtrace, through the compact flash card or as well as with the known MELAprint 42 log printer.
MELAG offers practices an economical alternative to the Vacuklav-series with its Euroklav 29 VS+, which, due to the instruments and the type of wrapping used, require no "Class B" steam sterilizer. The Euroklav 29 VS+ features four "Class S" programs for sterilization of wrapped, simple hollow instruments (e.g. scissors, needle holders, clamps etc.) and textiles, even if these are packed. Equipped with a powerful and efficient vacuum pump, a simple pre-vacuum occurs before sterilization in order to remove air safely from the wrapping and from the interior of the instruments.
Control and monitoring of pressure and temperature parameters necessary for safe sterilization take place by means of sensors and an innovative micro-processing control unit. The innovative electronic design permits versatility in documentation, digitally through the network and MELAtrace or through the compact flash card as well as with the known MELAprint 42 log printer.
The allround autoclave: Lots of space for your instruments
With the same technical equipment as the Vacuklav 31 B+, the Vacuklav 23 B+, as a "Class B" steam sterilizer, offers more internal space for use because it has a deeper interior space (45 cm, volume 22 litres). In this way, longer instrument sets can also be safely sterilized. Thanks to the patented air-cooling system, the Vacuklav 23 B+ is a real "stand-alone" steam sterilizer. Only a socket is necessary for operation. The strong vacuum pump and the efficient steam generator provide short cycle times so that simple wrapped hollow-instruments operated in the Quick-Program B can be taken out dry after only 40 minutes.
The integrated monitoring of the feed water and the electronic control of the Vacuklav 23 B+ avoid operating faults and secure high quality sterilization and maximum gentleness for your instruments.
The efficient, water-cooled vacuum pump secures successful sterilization and optimal dryness of instruments up to 5 kg in weight, also in continuous operation. The connection of the steam sterilzer to the water inlet and outlet is as simple as with a washing machine! Practices appreciate in particular the proved reliability of the Vacuklav 30 B+, the simple operating design and the numerous possibilities for loading.
Up to five trays or three cassettes can be sterilized at the same time in the compact sterilization chamber (depth 35 cm, volume 17 litres). The integrated monitoring of the feed water is an additional advantage, since bad water quality damages instruments and causes high costs.
The Vacuklav 24 B+ is a highly reliable "Class B" steam sterilizer. With its 10 cm deeper interior space (depth of sterilization chamber 45 cm, volume 22 litres) the Vacuklav 24 B+ is especially perfect for practices with larger sets of instruments. As with the Vacuklav 30 B+, the Vacuklav 24 B+ features water cooling of the vacuum pump and is thus especially suitable for practices that wish to carry out several sterilization processes one after another.
By means of a simple connection, just like a washing machine, the Vacuklav 24 B+ can be connected in the practice, without great installation efforts. The versatility of recording, the ease of use and the high reliability of the Vacuklav 24 B+ are appreciated by all practices.
The spacious miracle with 60 cm sterilization chamber
The Vacuklav 24 BL+ features an especially deep sterilization chamber (60 cm, volume of 29 litres) and is thereby especially suited to practices and hospitals that wish to sterilize extra-long instrument sets quickly. The technical equipment is equivalent to the steam sterilizer Vacuklav 24 B+.This model offers a much deeper sterilization chamber (60 cm, volume of 29 litres), and is subsequently suited to practices and other medical facilities that regularly sterilize extra-long instruments. The technical equipment within the model is equivalent to the steam sterilising Vacuklav 24 B+.
Quick, easy-to-use and stand-alone – now with DRYtelligence
This high-performance practice steam sterilizer brings the same record operating times as the almost identical Vacuklav 40 B+ Evolution. Its innovative double chamber technology means the sterilization and drying of unwrapped instruments in only 10 minutes; wrapped instruments in a Class-B program require no more than 20 minutes. Both times include fractionated pre-vacuum and drying. The intelligent drying system DRYtelligence uses especially-developed algorithms to adapt the drying to the load in order to shorten the operating times even further and save resources. The Vacuklav 41 B+ Evolution is fitted with a patented air-cooling system, making it into a true stand-alone steam sterilizer as it requires no connections other than to the electricity supply.
An especial advantage is the integrated software for approval, labelling and traceability of the sterilized instruments. This provides protection for doctor and patient alike. The extra-size of the colour-touch display makes work easier and avoids maloperation. Simply switch on the device, follow the intuitive instructions and enjoy your work.
Premium, large and stand-alone – now with DRYtelligence
The high-performance air-cooling of the Vacuklav 43 B+ Evolution makes it ideally-suited for all practices seeking a quick, large and high-performance practice steam sterilizer without a fitted water connection. A deeper sterilization chamber (45 cm) allows the acceptance of longer instrument sets than the otherwise identical Vacuklav 41 B+ Evolution permits. Very short operating times enable the use of this innovative steam sterilizer in practices seeking to decontaminate a large number of instruments in a short time. The intelligent drying system DRYtelligence uses especially-developed algorithms to adapt the drying to the load in order to shorten the operating times even further and save resources. This means that even partial loads can be decontaminated without wasting resources.
Further advantages include the XXL colour-touch display and the integrated software for approval, labelling and traceability of the sterilized instruments. This modern concept makes for easy operation, ensures safe operation for practice and patient alike and helps avoid malfunctions.
The large and fast steam sterilizer for practice and hospital.
With a loading quantity of up to 40 kg of unwrapped instruments, up to 35 kg of wrapped instruments and up to 7 kg of textiles, the Cliniclave 45 offers a far greater range than many other large steam sterilizers. The extra-large cylindrical sterilization chamber in combination with specifically designed insertion racks offers ideal solutions for all areas of application. Particularly fast operating times, a high load capacity and a reliable sterilization safety are the most important requirements for a large steam sterilizer for practices and clinics. Thanks to the patented technology of the sterilization chambers used in the Cliniclave 45 and the optimized operating hours enabled by this technology, the Cliniclave becomes a decisive component in the area of instrument treatment.
The slide rail integrated into the sterilization chamber simplifies the loading and unloading of the Cliniclave 45. It allows for the various loading configurations to be slid into and removed from the Cliniclave 45 in an effortless, ergonomic and fast manner. The extra-large colour touch display enables an intuitive operation as well as a quick programme selection and helps to avoid errors. The integrated software for documentation, approval and tracing saves costs and allows for comprehensive safety. The particularly economical handling of resources was one of the main objectives when designing the Cliniclave 45. Low energy and water consumption as well as a sophisticated development concept make the Cliniclave 45 one of the most economical, compact and lightest large steam sterilizers.
Cliniclave 45 M – The "M" stands for Magnum: even more loading capacity
With a sterilization chamber double the depth of its twin, the Cliniclave 45 M can accept two sterilization containers (30 x 30 x 60 cm). Representing double the loading quantity of the Cliniclave 45, it can hold 70 kg of instruments or 14 kg of textiles. With its innovative design, this device concept provides unbeatably good value for money. The Cliniclave 45 M provides all the functions of the Cliniclave 45. The mounts and possible loading congurations (of trays, containers and instrument baskets) and the loading system can be used with all devices in the Cliniclave series. The Cliniclave 45 M represents the ideal large steam sterilizer for hospitals, practices and outpatient centres requiring efficiency and planning for expansion.
The extra-large colour-touch display enables intuitive operation and quick program selection; all helping to avoid errors. The integrated software for documentation, approval and traceability saves money and enables complete security. The Cliniclave 45 M was conceived as an economical device and is especially sparing in its consumption of resources. Its especial low electricity and water consumption make it one of the most economical of the large steam sterilizers.
Washer-disinfector with active drying and short operating times.
The MELAtherm 10 is a washer disinfector complying with the EN 15883 European Standard. It is ideally used in processing instruments by machine.
With compact external dimensions, the MELAtherm 10 offers full features without any additional charge:
Feeding process agents with the dosing unit
Batch documentation with the CF card or network
Active drying in accordance with the EN ISO standard
Helpful user tutorials on our multimedia portal
MELAtherm 10 automatically monitors the rotation of the rinse arms, the rinse pressure and the filter sieves. Errors in the program mode or during operation are thus prevented. MELAtherm 10 can be fitted in floor units without any problem, the standard width being only 60 cm.
Should the MELAtherm 10 be free-standing next to the floor unit, MELAG offers a stainless steel cover plate. The optional floor unit, also available, facilitates ergonomic working height and creates additional storage space. MELAtherm 10 is equipped with a basis basket, with or without injector rail, at your option. Up to 11 hollow body instruments can be processed with the injector rail, e.g. suction tubes or dental handpieces and contra angles.
Instrument decontamination even more efficiently with game-changing innovations
The MELAtherm 10 Evolution series excel with convincing performance and ease of use. In addition to the proven product highlights of MELAtherm 10 – including active drying, integrated process agent intake and documentation interfaces at no additional cost, MELAtherm 10 Evolution washer disinfectors provide brandnew innovations for an even more efficient instrument decontamination workflow. MELAtherm 10 Evolution sets new standards in operation: Its large Smart-Touch Display features an intuitive operating concept with helpful video tutorials.
These product highlights make MELAtherm 10 Evolution unique:
AquaBoost technology provides double rinsing pressure for up to 44 % enhanced instrument cleaning
Large Smart-Touch Display with video tutorials for program selection and operation as easy as never before
Active interior and exterior drying protects the instruments against corrosion and damage
Perform user authentication and batch approval directly on the device with ProControl
MELAconnect - access the device status and program progress via the mobile app
Batch documentation with CF card or network
Feeding process agents with the dosing unit without any additional charge
Extended maintenance cycles of 24 months or 1000 cycles
You retain full control even during the program run: the new MELAconnect App allows you to access the device status and program progress from anywhere in your practice or clinic. Perform a fast and paperless batch approval right on the display with ProControl. The new AquaBoost technology ensures up to 44 % better outcome with double rinsing pressure for optimal cleaning results. The increased pressure permits the decontamination of even more instruments. Reprocessing of 23 handpieces and instruments for up to 40 patients in only 60 minutes, this is possible only with AquaBoost.
Whatever the size and specialization of your practice and clinic is, over 80 different baskets and accessories are available to adapt the practice-optimized washing chamber to all your needs. MELAtherm 10 Evolution is available in two versions - DTA (400 V three-phase current) and DTB (230 V AC).
With a medium-capacity, this space-saving model, available in either 100 or 125 litre sizes, can be customised with a range of optional accessories. Choose from electrically heated or piped steam devices to suit your needs, and add items such as fan accelerated cooling and loading baskets.
Choice and versatility for every practice, with these compact and fully portable models by Rodwell. No plumbing is required, and ongoing maintenance is an absolute minimum. Suitable for Culture Media, Portaclaves are designed to be robust and save space wherever they’re used.
Square section chamber
Cost effective hinge/bolt door
Available in electrically heated version
or from a piped steam source
Integrated steam generator
Fan accelerated cooling
Air ballasting option
Waste discard system
Drain line condenser for plastic drains
Range of data recording options
Scale prevention systems
Vacuum air removal system
Comply with infection control standards at the touch of a button and avoid cross contamination: Completely safe with DAC Universal. Your patients and employees can rely on this all-round protection and put their complete trust in the treatment with reprocessed and thermally disinfected instruments.
With the ability to reprocess, disinfect and sterilise instruments at the touch of a button, both patients and employees alike can rely on the all round protection afforded by the DAC Universal.
Using an innovative, highly conductive copper chamber, meeting Europe’s Class B sterilisation standard, the system delivers incredible efficiency, alongside its large capacity, resulting in a high-precision performance with each use.
Reverse Osmosis (RO) is a water treatment process that removes contaminants from water by using pressure to force water molecules through a semi-permeable membrane. During this process, the contaminants are filtered out and flushed away, leaving clean water suitable for your processes. A storage vessel and booster pump are also included in the setup to ensure water is delivered at an appropriate flow rate.
This particular model can produce 80 litres of water per day, includes a booster pump, and should therefore be suitable for installing in low pressure environments.
When all you want is the best quality of air, choose Bambi! With decades of design in precision air compressors, Bambi understand that clean air is essential in today’s dental surgery –protecting patients, and ensuring the efficiency and effectiveness of a range of dental procedures.
With its quiet running and contemporary design, the Effica E1 is capable of enhancing any instrument cleaning workstation in any laboratory. Even with accessories inside, it still runs smoothly and discreetly at all times, and features an impressively enlarged drain line for 65% faster emptying than other models. With a one gallon capacity tank, and optional automatic locking cover, this model is exceptional for cleaning dentistry materials, removing tartar and other debris both quickly and efficiently.
The very first Batch Monitoring System (BMS) to monitor loads during the steam sterilization process, the GKES Helix Device is exceptionally practical and efficient for dental practice use. With its advanced, internationally patented design, it is both cost-effective and environmentally friendly – with only one single-use consumable per BMS. Also pollution free and non-toxic, the indicator strip used can be disposed of in normal everyday waste. Made from extremely durable materials, the device can be used for an unlimited number of cycles.
Rather than heat, it is steam that influences the colour change in these adhesive-backed strips. With 250 indicators in each bag, correct sterilisation conditions can be established in just 3.5 minute. The strips can also be used to detect sterilisation failures in packaging, loading, and the steriliser function itself.
Helix Process Challenge Device + 250 Indicator Test Strips
Helix Process Challenge Device + 250 Indicator Test Strips
Made using stainless steel, as opposed to conventional plastic, this innovative device ensures that your steriliser is functioning adequately. Test strips placed within the extremely durable helix PCD module change colour to indicate sterilising, and establish correct processing conditions.
Validated for testing the removal of air, and suitable for small, Type B steam sterilisation processes, steam penetration indicates that air and non-condensable gases have been removed. The test conforms to EN867-5 for use in performance testing for small sterilisers Type B and EN 554: 1994
'Efficient with their service they provide to our practice and are always on hand with support and information to try and resolve any problems or concerns.'
Christine, Graham Lovis Dental Practice
'Good, efficient service. Always come when a problem is reported.'
Jane, Touch Little Dental Centre
'We have used this company for many years and have always had excellent service. The engineers are very knowledgeable with regard to all of the equipment. I would recommend Durham Autoclaves and Steriliser Services.'
Deborah, Wallace Thomas Hobson & Emmett Ltd
'We value the friendly, reliable service we receive from Durham Autoclave and Steriliser Services team and greatly appreciate their efficiency, expertise and helpful manner'